Long Range Shooting with Handloads – Powder can vary Lot to Lot- Take Extra Care with Max Loads

In loading for moose with my Browning X-Bolt 7mm Rem Mag, I continue experimenting with powders and bullets . My two favorite bullets are Nosler ABLR 168 and 175 grain bullets. In the process, I am aware that I am looking for max loads and accuracy too.

As a result, I discovered measurable lot to lot variation in some powders. Alliant Reloader 22 is one of those I see vary,  and on the lower side so far…a good thing.

Thus, I approach new powder lots with more caution. Instead of loading hot loads with the same grain weight as my last lot, I back off a few grains or more and work up several rounds with my chronograph and inspect the brass and primer for overpressure signs.

At max loads you should also be aware that some magnum primers can be hotter and will effect velocity and may create overpressure as well if your are on the cusp.

Those who really push their rifle and cartridge in winter time can find those rounds perhaps too hot in summer when temps are in the 90’s. Why is my bolt sticking, you ask?

I think to keep my winter max loads a bit lighter and be aware of loads you loaded winter to summer. Dating them can help.  

Load Safely!