I moved my best scope, Leupold’s Gold Ring VX-6 3-18x44mm to the TC Pro Hunter using Weaver Grand Slam style bases and a quick detach ring.

Shooting in very cold weather created a situation that I could not control with the levers as they were hard to tighten and became loose at the range at 15ºF, and could be banged loose on branches in the heavy woods.

Accordingly, I went to my NH  Bass Pro shop and found Warne Scope Mounts in Steel (Made in the USA) for a 30mm scope tube. It was almost impossible to find out of regular hunting season… but I did.

It is a split ring in right and left halves.

The directions were great as I already had a Wheeler Fat Wrench with a T-15 tip. All I had to do was set the torque to 25 in-lbs for the screws and I was done. Cost $59.00 but I did not shop around as I wanted them now.

What I had not purchased for the VX-6 was scope covers, so I went ahead and fitted the scope in the BassPro store with Butler Creek Flip Open Scope Covers. The front 44mm lens took a 53.3mm cover.

and the rear lens took the 42.2 mm lens cover with the red lever.

I have had great success with all  my other scopes with Butler Creek covers but it is best to bring your scope with you and fit it right there.

I tested the E-Tips, Scope, Mounts and Covers today at the range and was shooting off the shelf Nosler E-Tips at 100 yards. I was  pleased as punch shooting between one and two inch groups. At 50 yards, where most of my shots at Boar should be, I wasn’t gonna burn more powder and bullets to split hairs.

If you get snow in your barrel, what then? Use a single piece of elect tape to cover your barrel muzzle or buy latex finger cots at your local grocery store or pharmacy. Like a small condom for your rifle barrel.

Method #2 bring a bore snake in your backpack if you have to clean the bore in the field due to mud or snow.

My TC all Rigged up

Bring on those ornery Russian Boar tuskers…

© 2017