Chasing Bucks this Fall!
Thompson Center is offering a $75 rebate! Wow!
https://www.tcarms.com/rebates
Category Archives: Uncategorized
Lancaster Flintlock at 100 yards
I took 2 shots yesterday with my Lancaster Flintlock. One at 50 yards… see the left hole. The second shot at 100 yards hole at right after some minor sight adjustment with a tap from my hammer. I determined in a previous outing that the bullet rises in its parabolic trajectory out at 50 yards and drops at 100 yards. At 100 yards the point of aim is equal to the 25 yard point of aim. I am pleased with these shots from open sights. If this were a deer’s vitals, I be skinning by now.
Good Shooting!
Happy Independence Day July 4th 2017
You know, more and more families are reading the Declaration of Independence on this day in honor of our Independence from tyranny and subjugation by a British King in 1776. I am very proud of the changes made by President Donald Trump thus far.
As I read the reasons for the Declaration aloud it became clear to me that America, “We the People” voted in 2016 to stop the oppression and subjugation by the likes of Barrack Obama and those of a would be Hillary Clinton who wanted to force an all powerful government down our throats as if they knew best.
The People spoke loud and clear!
Happy Independence Day!
http://www.constitution.org/us_doi.pdf
F-Open Match Results 17-Jun-2017 with 6.5 Creedmoor by Jason Hale
I’m back to provide an update on the most recent 3×600 yard F-Open Match at Nashua Fish and Game. This year I am doing a significant amount of testing, which doesn’t allow for getting truly comfortable with my set up, never the less, it was exciting.
To preface the discussion on results, I need to explain the challenges with the F-Open conversion to the Creedmoor barrel. In preparation for the match and some practice time, I changed out the barrel in my Savage 10 action to the Shilen 28″ stainless match 6.5 Creedmoor bull barrel.
Following the barrel swap, I installed the barreled action to my aluminum JPRifles AMCS chassis. I was going to shooting in F-Class, Open, with the Nosler 140 gr 6.5mm/.264 Reduced Drag Factor ™ (RDF) bullets and due to the F-Class, open rules I could have a much heavier gun (22 lbs max). That’s why I decided to move back to the heavier aluminum chassis. The only downside was that when the rifle was mounted in the rest, I couldn’t use a rear bag that was a standard height. I had to rig up a rear bag that was tall enough to be able to level the gun. The PRS stock toe, is not as low as a true F-Open competition stock, but this isn’t a “built for competition” rig. This is fun on a budget while learning to read the wind 🙂
I tuned my 6.5 loads easily with the Nosler RDF’s we are testing, getting 1/4 to 1/2″ groups while humming along comfortably at 2800 fps with 41.7gr of H4350.
Very impressive, those RDF’s. From my first experience with new gear, I was prepared with what to expect this time. I was stayed focused and was pleasantly surprised, as the day went on I got better and better, despite the make shift gear.
As the day was not hot, I was able to keep the Leupold Gold Ring 7-42X55mm scope we are testing (seen above) dialed all the way to 42x and it was awesome to see the bull much more clearly and to use the target rings to aim for wind calls.
Here are my scores below for my first time in F-Open with new gear.
Match 1: 185-4
Match 2: 192-6
Match 3: 196-8
Final total: 573-18
The gun and Nosler 140 RDF’s were clearly shooting better than I in the beginning, but as I got the hang of the “free recoil” game, it all started to fall into place. Free recoil is allowing the rifle to track rearward under recoil with some space in between you and the buttstock, very much like regular benchrest shooting. I like F-Open, but for now, it’s just fun for me and a way to continue to learn the ways of the wind. I think the only way to become more competitive in this class, you need first get better at wind reading and perhaps get a purpose built rifle/stock combination that was meant to be used in a rest. I am more than happy with how this turned out. I am super pleased with how the Nosler RDF’s were surprisingly easy to tune and shoot accurately! I will be shooting this combination again July 8/9.
See you at the range!
© 2017
Advertise with New Hampshire Rifleman Magazine
We are now accepting advertising from USA and Local NH Businesses involved in retail sales and Outfitters for Hunting and Fishing. Please see the Header Menu under the front page photo for “Advertise Your Business? Adds and images shall be in a Jpeg format and integrated into articles for each exciting monthly issue of the on line New Hampshire Rifleman Magazine. Long term add’s by request for a quarter or for a whole year are possible as well by contacting the Editor-In-Chief Ed Hale at erhale@comcast.net.
Lots of Learning: Match Results, Mystic Precision Bipod Review, and Leupolds Gold Ring VX-6 7-42 x 56mm Competition Scope with CDS
Testing new gear in a long range match.
I had an interesting match last Sunday (28-May 2017). In my previous article here I announced the intent to test some new gear in a match. I learned a great deal about changing gear before a match, but the biggest takeaway is: If you change gear and don’t practice with that new gear at competition distance, you should be prepared to have a few accuracy surprises that happen once you start punching holes in paper.
First Impressions: Leupold Gold Ring VX-6 7-42x56mm Competition scope with CDS
First things first, the glass is just gorgeous to look through. The morning of the match I had it dialed up, but as the day went on and the mirage started to intensify I had to back off a bit to 32X. I also realized that I have some additional adjustments that are necessary for eye relief when in the prone position.
Learning about the impact of new gear: Leupold graciously supplied rings for our testing that would mount to any rifle for us to test as long as it had a picatinny rail. The particular issue with my rifle is that I did not have a high enough comb nor adjustable comb to accommodate the ring height. I knew this going into the match but honestly didn’t think that it would matter that much, but it definitely did. The difference or variability in cheek pressure on the comb had a huge impact elevation control and lead to uncomfortable body/head positions and a poor score.
First Impressions: Mystic Precision MPOD Bipod
While zeroing the rifle the bipod was like a rock, on the line at distance, however, my “squeeze bag” style rear rifle rest was not cutting it. In order for the bags to work effectively you need to apply consistent downward force with your cheek and squeeze the back to it to remain stable. If you can’t apply consistent pressure with your cheek, then having a repeatable position is difficult, and my score’s definitely reflected that; my worst for the day was below along with my typical score from last year.
Score last year with original set up. |
Score with different set-up (Different SCOPE/BIPod). |
|---|
I will note that at the time of the string of fire, a shot was marked as a miss, but following my string and talking to Art Lamb, who was scoring for me, he informed me that one of my rounds was subsonic at 600 yards and he later identified the impact in the white portion of the target, so not a miss, but perhaps a 5 or 6. Not too happy about that; I did notice that my barrel was getting a bit hot from the quick string of fire, so I don’t know what happened here. My next purchase is a good old kitchen timer to make sure I don’t go too fast and heat the barrel up too much.
On a humorous dad note, my wife called me and informed me that my mother in-law was at our house with the kids needing to put my youngest son down for a nap. The only problem was that I locked all the doors and she did not have the key. Rather than breaking into a fit of twitches after my horrible match, I calmly let it roll off my shoulders and trekked 4 miles down the road and let her back in. It’s good to live close to the range. Looking back and doing some diagnostics on the poor match, I realized that I should have changed bags over to one of my fixed rear sand bags with the bipod. The toe of my stock is angled so that elevation corrections can be as simple as moving the bag fore or aft of the buttstock. We always learn. I’ll be better acclimated to the new gear next time. Next up; a barrel swap will take place to the new Shilen 6.5 Creedmoor Match Barrel and we’ll do some F-Open work with a front rest for a match on 17-June. I love the Savage Barrel Nut!! It’s so easy to swap barrels!
Until next time…..
See you on the range!
© 2017
Savage M12 in Palma in 308 Win Just Arrived
What a shooting machine! We are very excited! Jason will shoot a July Match with it and the Leupold VX-6 7-42 55mm scope. Wow! Pictures soon! We hope to shoot Nosler RDF’s.
Savage Ashbury Precision Rifle 6.5 Creedmoor – Just Arrived
The Savage® M10 Ashbury Precision Rifle in 6.5 Creedmoor is said to be a great starter long range Competition Rifle with low recoil. It is part of Savages Law Enforcement series. We will put it through its paces. What is clear hear at the get-go is that the Magpul CTR® stock appears too low when a scope is mounted. We recommend adding a cheek rest and we are seeking a Magpul PRS 25 M110 or similar cheek rest stock to add to it ($240.00) or the simple Magpul CTR® MOE® Riser for 20 dollars on line. The Ashbury is also offered in .308 Winchester. Below is a Savage Video on the Accutrigger™
PRODUCT DESCRIPTION
- Series: Law Enforcement
- Magazine: Detachable box
- Stock Material: Synthetic
- Barrel Material: Carbon Steel
- Barrel Finish: Matte
- Barrel Color: Black
- AccuTrigger: Yes
- AccuStock: No
https://youtu.be/kxQZ1M7FXCM
Pennsylvania Long Rifle Build Update
To date I have 60 hours into the build of this so called Custom Kit Rifle and I have made my share of minor headaches but each time I get through a given situation I come out with a smile. The rifle is coming out very well so far but haven’t got a photo for you yet. My appreciation for the German Master Craftsmen of the Pennsylvania Rifle in the 1700’s has grown substantially. I can only imagine the tools they used and I have a large portion of the work done already for me and a video to aid me. So why does it take so long? First, get rid of time. Moving the project faster increases risk of a major mistake. One major mistake can cost me this expensive project. Patience is a virtue I must master here along with creating and learning things that help improve your work. If you are skilled at working in a wood shop or metal shop then this project will be much easier. Things I have learned include inlay of brass to wood. I have not mastered it just learned it. Fitting and pinning down a barrel to 44 inches of wood when the barrel is thicker on each end and thinner in the middle was a huge undertaking as I could have easily destroyed the wood by scraping too much off or a slip of the chisel. But I didn’t. Getting the barrel in the right position for the lock assembly and where the touchhole should be was a learning process for sure. Shortly I will be adding the lock and its thru bolts and then inlaying the patchbox and release mechanism. Then I can show pictures of progress. Still a long way to go…
That is the update! Photos soon!
New Hampshire Rifleman Announcement
Welcome to my son Jason Hale as a Contributor and Editor here at New Hampshire Rifleman Magazine. I welcome his talent with rifles, reloading and marksmanship and his skills as an editor and video specialist as we strive to deliver a fun, educational and entertaining experience to our worldwide readership.
Ed Hale – Editor-In-Chief